Diving Neoprene Wetsuit Repair Glue

Products

Diving Neoprene Wetsuit Repair Glue

  • Details

Scuba Diving Neoprene Wetsuit Repair Glue Fix Patch Adhesive 30ml

 

THE NEOPRENE REPAIR KIT SUPERB FOR THOSE ON THE SPOT NEOPRENE REPAIR KIT. SUPPLIED WITH QUICK DRYING NEOPRENE ADHESIVE ESPECIALLY FOURMULATED FOR USE ON NEOPRENE TO REPAIR PUNCTURES,NICKS, CUTS.

GLUE REPAIR KIT CONTAINS:
1X 30ML TUBE OF NEOPRENE GLUE
3X 1’’ NEOPRENE DISKS
3X11/2’’ NEOPRENE DISKS
3X2’’ NEOPRENE DISKS
1X12 NEOPRENE TAPE

KIT INSTRUCTIONS:
1.    Locate the hole/rip or tear in the neoprene, clean the surrounding area with fresh water and leave to dry.
2.    If the damage is small you should be able to repair the split/hole using the neoprene adhesive.Stretch open the hole and apply glue to the either side. Allow the glue to become tacky wait a couple of minutes before pinching the hole closed using a bulldog clip. This should be left for a minumum of 1 hour. Please allow 24 hours for the glue to dry completely.
3.    For bigger holes/tears follow steps above then turn your neoprene wetsuit/accessories inside out to expose the damaged area.
4.    Take on of the neoprene repair disks or tape supplied picking the correct size.Draw a circle around the disk so that the tear/hole is in the middle.
5.    Apply a coating of glue to the neoprene disk and onto the marked circle on the inside of the neoprene this to dry for 5-6 hours before applying a second coat to both.Allow this coat to dry for 2~3 minutes and then apply the patch and push the two layers firmly together.
6.    Place your neoprene wetsuit/accesorries on a flat surface with a heavy object over the patch.You should leave this for 24 hours.
7.    Your hole/tear should be fixed and your garment/accessory ready to wear.

REPAIR WITHOUT PATCH/ NEOPRENE DISKS
Clean the damaged area. Apply a thin layer of
Neoprene adhesive to both the edges of the ripped neoprene.It should become
touch dry in three minutes. Apply a second thin layer of adhesive again. Wait for it to
become touch dry again. Then carefully align the edges and press them firmly together.
Hold for a further two minutes under pressure.
The repair is now finished and ready for use. The bond achieves full strength after 24
hours but wetsuit can be used with care immediately.

Previous Product:Black Neoprene Cement Wetsuit Flexible Waterproof Repair Seal Cement Kit

Next Product:Black color contact cement neoprene glue for wetsuits

Post your feedback

The Code: